Used oil recovery and vacuum systems
The tanks are double-acting to drain and vacuum used engine oil from vehicles by means of a specific probe inserted into the dipstick housing. It is pre-pressurized up to 0.8 bar by means of 7/10 bar compressed air connection. They operate autonomously and do not require a continuous power source. For optimal use, we recommend vacumming the oil at a temperature no lower than 60-80° C.
Pneumatically operated tank divided into two parts by an elastic membrane. One part is reserved for oil filling and the other part is reserved for the introduction of compressed air with the valve calibrated at 2 bar max. The membrane assures that air never comes into contact with the oil, thereby preventing any risk of emulsion.