Pneumatic pumps, standard series, with suction shaft in stainless steel AISI 304 and EPDM gaskets for the supply of fluids with particular chemical characteristics. Heavy duty pneumatic pumps, particularly designed for the supply of fluids under demanding conditions and where a high delivery is required. With suction shaft in stainless steel AISI 304 and PTFE seals, suitable for the supply of fluids with particular chemical characteristics. It is recommended to check the compatibility of the fluid with the materials of the wetted pump components before use.
|Art.||US 5495||US 1045||US 1049||US 1071||US 1050||US 1079||US 1081||US 1082||US 1083|
|Compressed air supply||-||30 - 120 psi|
|Outlet pressure||-||120 psi||350 psi||120 psi||350 psi||470 psi||940 psi||1400 psi||1860psi|
|Delivery||2 gpm||9 gpm||4 gpm||9 gpm||4 gpm||9 gpm||8 gpm||7 gpm||4 gpm|
|Connection compressed air||-||1/4″ NPT (F)||1/4″ NPT (F)||1/4″ NPT (F)||1/4″ NPT (F)||3/8″ NPT (F)||1/2″ NPT (F)||1/2″ NPT (F)||1/2″ NPT (F)|
|Connection lubricant outlet||3/4″ NPT (F)||3/4″ NPT (F)||1/2″ NPT (M)||3/4″ NPT (F)||1/2″ NPT (M)||3/4″ NPT (F)||3/4″ NPT (F)||3/4″ NPT (F)||3/4″ NPT (F)|
|Max air consumption with 8 bar pressure||-||55.5 gpm||55.5 gpm||55.5 gpm||55.5 gpm||74 gpm||542 gpm||507 gpm||476 gpm|
|Length suction tube||37″||0.4″||10.4″||37″||37″||10.4″||14.2″||14.2″||14.2″|
|Weight||4.4 lb||11 lb||8.8 lb||11.5 lb||9 lb||26.5 lb||33 lb||35 lb||42 lb|
Pneumatic self-priming rotary gear pump for conveying fluids and liquid chemicals.
AISI 304 stainless steel pump body, bronze gears (nylon 12 – fiberglass on request), Viton® seals and stainless steel shaft. Suitable for spraying, particularly suitable for carrying out closed-loop liquid circulation, for example applied to part washers.
|Art.||Compressed air supply||Air consumption||Outlet pressure||Flow rate||Connection threads||Weight|
|US1058||58 psi||53 gpm||58 psi||2.8 gpm||3/8″NPT (F)||3.3 lb|
Electric, selfpriming gear pump for the transfer of fluids and aggressive liquids; guarantees a constant flow and a low noise level. Pump body in stainless steel AISI 304, gears in Kevlar®. Connection threads 3/8” NPT (F). Protection category IP 55. Cable 5’ with plug included.
|Art.||Voltage||Current drain||Rpm||Power||Outlet pressure||Delivery||Weight|
|US6125||110VAC-60Hz||4 A||2800||550 w||218 pso||3 gpm||4 lb|
Pneumatic double diaphragm pump for transferring fluids and liquid chemicals. Pump body and ball seats made of electropolished AISI 316 stainless steel with an average roughness of 2.7 microns, membrane made of Hytrel and PTFE. Dry self-priming up to 6m, unlimited dry running, ATEX certified for zones 1 and 2.
|Art.||Compressed air supply||Consumption compressed air||Outlet pressure||Max flow rate||Connection threads||Weight|
|US1064||29 - 102 psi||53 gpm||102 psi||13 gpm||1/4″NPT (F)||13 lb|
|US1065||29 - 102 psi||66 gpm||102 psi||26 gpm||3/8″NPT (F)||20 lb|
|US1066||29 - 102 psi||93 gpm||102 psi||42 gpm||1/2″NPT (F)||44 lb|